飞马加速器网址由聚晶金刚石层与硬质合金基体两部分构成，是在特定的高温高压条件下烧结而成的超硬复合材料。
飞马加速器网址具有优良的耐磨性，良好的抗冲击性及热稳定性，适用于制作石油钻头，煤田地质钻头及切削刀具等。
华谊公司可提供多种规格的飞马加速器网址产品。飞马加速器网址的标准产品为圆柱形。根据客户要求，可生产特殊规格的产品，飞马加速器网址的结合面分平面和槽形面两种。槽形界面有助于增强复合片的结合强度，提高其整体抗冲击性。
PCD consists of two parts: polycrystalline diamond layer and tungsten carbide base. It is a super hard product made by sintering super hard composite material under special high temperature and high pressure.
This product has the feature of good wear-resistance, impact resistance and good thermal stability. It is suitable for making petroleum drill bits, coal mine drill bits and cutters.
This corporation can provide PDC with various specifications. The standard PDC product is of cylindrical form. But other form ones can be made according to the demand of the users. The bond surface of PDC is divided into plain face and groove face. The latter are helpful to strengthening the bond strength of the PDC and enhancing their whole impact resistance.
石油级飞马加速器网址
Petroleum degree PDC
| 产品型号 Type |
规格尺寸(mm) Specification Size(mm) (D×H) |
|
|---|---|---|
| 1916Y-DT | Φ19.05×16.31 | |
| 1913Y-DT | Φ19.05×13.20 | |
| 1908Y-DT | Ф19.05×8.00 | |
| 1908Y-DT | ||
| 1308Y-DT | Ф13.44×8.00 | |
| 1308Y-DT | ||
| 1313Y-DT | Φ13.44×13.20 | |
| 1313Y-DT | ||
| 1613Y-DT | Φ16.00×13.20 | |
| 1303Y-DT | Φ13.30×3.53 | |
| 0808Y-DT | Φ8.00×8.00 | |
| 0803Y-DT | Φ8.00×3.53 | |
| 0508Y-DT | Φ5.00×8.00 |
石油级飞马加速器网址，金刚石层厚度为：0.8--1.5mm（金刚石层厚度最高可加工到3mm）磨耗比不低于30×104。抗冲击性能优异。热稳定温度达到750℃以上。
Petroleum degree PDC. The thickness of diamond layer is: 0.8-1.5mm (the thickest layer can be processed to 3mm). Its wear rate is not less than 30x10 4. It has good impact resistance., and its thermal stability may reach above 750℃.
地矿级飞马加速器网址
Geological mine degree PDC
| 产品型号 Type |
规格尺寸(mm) Specification Size(mm) (D×H) |
|
|---|---|---|
| 1308-DT | Φ13.44×8.00 | |
| 1304-DT | Φ13.30×4.50 | |
| 1303-DT | Φ13.30×3.53 | |
| 1004-DT | Φ10.00×4.50 | |
| 0808-DT | Φ8.00×8.00 | |
| 0803-DT | Φ8.00×3.53 |
地矿级飞马加速器网址，金刚石层厚度为：0.8--1.2mm，磨耗比不低于18×104。热稳定温度达到720℃以上。
Geological mine degree PDC. The thickness of diamond is 0.8-1.2mm.Their wear rate is not less than 18x10 4 and their thermal stability may reach above 720℃.
Z—带结合槽的PDC；P—结合面为平面；Y—表面研磨PDC；D—金刚石层倒角；T—合金倒角
Z stands for the PDC with bond groove; P stands for that the bond surface is plain surface; Y stands for PDC used for surface lapping; D stands for diamond chamfer; T stands for alloy chamfer.
注：以上产品为本公司常规生产产品，其它规格可按用户要求生产。产品直径范围为：19.05--4.00mm；高度范围和结合面结构形式可按用户要求加工生产。
Note：The above products are the regular ones this corporation produces. Other specification ones can be produced according the user’s requirements. The diameter range of the products is 19.05—4.00mm. The height range and the structure form of the product can be processed and produced according to requirement of the users.
PCBN(切削刀具用立方氮化硼复合片)
华谊公司生产的立方氮化硼刀具片为标准圆柱形复合片，适用于高硬度黑色材料(HRC45-65)的切削刀具。加工的表面光洁度高，明显提高切削效率和降低生产成本。
Our cooperation manufacturing the PCBN products with standard cylindrical shape,it is suitable for cutting ultra hard(HRC45) black materials. The surface of the working pieces that has been processed can reach high surface finish, the cutting efficiency is apparently raised and the production cost decreased at the mean time.
切削刀具用立方氮化硼复合片
Polycrystalline diamond CBN composite for marking cutting tools
| 规格 Specifications |
尺寸 Size (mm) | 规格 Specifications |
尺寸 Size (mm) | ||||
|---|---|---|---|---|---|---|---|
| D | T | A | D | T | A | ||
| R101-360 | 10.00 | 1.50 | 360o | RT101-90 | 10.00 | 1.50 | 90o |
| R103-360 | 10.00 | 3.20 | RT103-90 | 10.00 | 3.20 | ||
| R133-360 | 13.20 | 3.20 | RT133-90 | 13.20 | 3.20 | ||
| R134-360 | 13.20 | 4.50 | RT134-90 | 13.20 | 4.50 | ||
| R191-360 | 19.10 | 1.60 | RT191-90 | 19.10 | 1.60 | ||
| R193-360 | 19.10 | 3.20 | RT193-90 | 19.10 | 3.20 | ||
| R194-360 | 19.10 | 4.50 | RT194-90 | 19.10 | 4.50 | ||
| RL101-108 | 10.00 | 1.50 | 180o | RL101-60 | 10.00 | 1.50 | 60o |
| RT103-180 | 10.00 | 3.20 | RT103-60 | 10.00 | 3.20 | ||
| RT133-180 | 13.20 | 3.20 | RT133-60 | 13.20 | 3.20 | ||
| RT134-180 | 13.20 | 4.50 | RT134-60 | 13.20 | 4.50 | ||
| RT191-180 | 19.10 | 1.60 | RT191-60 | 19.10 | 1.60 | ||
| RT193-180 | 19.10 | 3.20 | RT193-60 | 19.10 | 3.20 | ||
| RT194-180 | 19.10 | 4.50 | RT194-60 | 19.10 | 4.50 | ||
特殊规格尺寸可按客户要求加工生产。
Special types and dimensions of the PCBN cutters are available upon request.
飞马加速器下载是金刚石微粉与金属结合剂经高温高压烧结而成的聚晶体,以金刚石键结合为主,具有很高的耐磨性、韧性及导热性。适用于高速拉制有色金属和不锈钢线材。
华谊公司可提供多种粒度的拉丝模坯，平均粒度有3υ、5υ、10υ、25υ、50υ、等。细粒度模坯用于拉制表面光洁度要求高的软线。粗粒度模坯的耐用度高，用于拉制硬线。
华谊公司生产无外拉丝模坯和硬质合金支撑环拉丝模坯两大类产品，以满足同需求。有硬质合金支撑环拉丝模坯多用于制造大孔径模坯，拉制较粗的线材。
Diamond wire drawing die blanks are polycrystalline diamond (PCD) products produced under advanced high temperature and ultra-high pressure, diamond powder and a few of metal catalyst (Cobalt) sintered together with diamond-to-diamond bonding. They have not only high wear resistance, hardness and thermal conductivity but also high mechanical strength and tenacity. Our diamond die blanks are a unique product to draw a wide range of wire such as copper, aluminum, nickel, stainless steel and etc.
We provide two types: tungsten carbide supported die blanks and self-supported die blanks, TDW are suitable for drawing with thick wire.
无硬质合金外环拉丝模坯(六方形)
Without tungsten carbide outer ring(hexagonal)
| 产品型号 Type |
ADDMA 代号 No. |
规格尺寸 Specification Size (mm) |
平均粒度 Avg. Grain Size (μ) |
最大推荐孔径 Max. Die Size (mm) |
 |
||
|---|---|---|---|---|---|---|---|
| D | T | φ | |||||
| DH1510 | —— | 1.5 | 1.0 | —— | 005,010 | 0.2 | |
| DH2510 | D6 | 2.5 | 1.0 | —— | 005,010 | 0.4 | |
| DH3215 | D12 | 3.2 | 1.5 | —— | 005,010 | 1.0 | |
| DH5225 | D15 | 5.2 | 2.5 | —— | 005,010 | 1.5 | |
| DH5235 | D18 | 5.2 | 3.5 | —— | 005,010 | 2.0 | |
无硬质合金外环拉丝模坯(圆形)
Without tungsten carbide outer ring(Round)
| 产品型号 Type |
ADDMA 代号 No. |
规格尺寸 Specification Size (mm) |
平均粒度 Avg. Grain Size (μ) |
最大推荐孔径 Max. Die Size (mm) |
 |
||
|---|---|---|---|---|---|---|---|
| D | T | φ | |||||
| DR1510 | —— | 1.5 | 1.0 | —— | 005,010 | 0.2 | |
| DR2510 | D6 | 2.5 | 1.0 | —— | 005,010 | 0.4 | |
| DR3215 | D12 | 3.2 | 1.5 | —— | 005,010 | 1.0 | |
| DR5225 | D15 | 5.2 | 2.5 | —— | 005,010 | 1.5 | |
| DR5235 | D18 | 5.2 | 3.5 | —— | 005,010 | 2.0 | |
| DR8040 | D21 | 8.0 | 4.0 | —— | 005,010,025 | 3.0 | |
| DR9553 | D24 | 9.5 | 5.3 | —— | 010,025,050 | 4.0 | |
硬质合金外环拉丝模坯
Tungsten carbide supported blanks
| 产品型号 Type |
ADDMA 代号 No. |
规格尺寸 Specification Size (mm) |
平均粒度 Avg. Grain Size (μ) |
最大推荐孔径 Max. Die Size (mm) |
 |
||
|---|---|---|---|---|---|---|---|
| D | T | φ | |||||
| DW1515 | D12 | 2.5 | 1.5 | 5.00 | 010,025 | 1.0 | |
| DW1515 | D15 | 4.0 | 2.3 | 8.12 | 005,010,025 | 1.5 | |
| DW4029 | D18 | 4.0 | 2.9 | 8.12 | 005,010,025 | 2.0 | |
| DW7040 | D21 | 7.0 | 4.0 | 13.65 | 005,010,025 | 3.5 | |
| DW7053 | D24 | 7.0 | 5.3 | 13.65 | 010,025,050 | 4.5 | |
| DW8775 | D27 | 8.7 | 7.5 | 14.50 | 010,025,050 | 5.0 | |
